EC003023 version 4

Fitting with 1 connection

Published in
ETIM-10.0
Also called
Blind plug, Cap, Cap round, Cap with hexagonal, Cap with square, Capillary fitting, Clamp fitting, Clamp fitting with 1 connection, Clamping-strip fitting with 1 connection, Cleaning screw cap, Click fitting, Click insert fitting with 1 connection, Compression fitting, Compression ring closing plate, Compression ring fitting with 1 connection, Dowel, End coupling, End stop, Endcap, Glue coupling with 1 connector, Glue fitting with 1 connection, Glue socket with 1 connector, Grooved fitting with 1 connection, Hood, Laminated fitting with 1 connection, Malleable fittings, Plug, Plug with socket, Plug with square, Press cap, Press fitting, Press fitting with 1 connection, Push cap, Push fitting with 1 connection, Radiator stop, Shell, Shield, Slide cap, Slide dowel, Slide fitting, Slide plug, Sliding cap, Sliding dowel, Sliding fitting, Sliding fitting with 1 connection, Sliding plug, Soldered cap, Soldered fitting, Soldered fitting with 1 connection, Stop, Stub end, System fitting with 1 connection, Threaded fitting, Threaded fitting with 1 connection, Threaded plug, U2 end cap, Weld fitting, Welded-on fitting, Welded-on fitting with 1 connection, Welded-on plastic fitting with 1 connection, Welding fitting

Material (5)

#FeatureTypeUnitAllowed values
1
Material connection 1
A—
2
Material quality connection 1
A—
Al 99.0 (3.0205)Al 99.5 (3.0255)Al 99.9 (3.0305)Aluminium bronzeBronze (Rg 5)Bronze (Rg 7)Bronze (Rg 12)Zinc-poor bronze (Rg 10)Zinc-free bronze (90/10)Cu-DHP (CW024A)CuNi10Fe1MnCuNi10Fe1.6Mn
81 moreCuSn4Zn2PSCuSn5Zn5Pb2CuSn5Zn5Pb5-CCuZn21Si3P (CW724R)CuZn33Pb1.5AlAs (CW626N)CuZn35Pb2Al-C-GMCuZn36Pb2As (CW602N)CuZn36Pb3 (CW603N)CuZn38AsCuZn39Pb3 (CW617N)CuZn39Pb2 (CW612N)CuZn39Pb3 (CW614N)CuZn40Pb2 (CW617N)EN AW-5083 (AlMg4.5Mn)EN AW-5754 (AlMg3)EN AW-6060 T5(AlMgSi)EN AW-6082 T6(AlSi1MgMn)EN-GJMW-400-5 (EN-JM1030)Ethylene-propylene diene monomer rubber (EPDM)Alloyed steelCast iron EN-GJL-200 (GG 20)Cast iron EN-GJL-250 (GG 25)Cast iron EN-GJS-400-15 (GGG 40)Cast iron EN-GJS-400-18 (GGG 40.3)Cast iron EN-GJS-500-7 (GGG 50)Malleable cast ironCast steelStonewareFibre-reinforced plasticDezincification resistant brass (DZR)NBR (nitrile rubber)PA 6PE-40PE-50PE-80PE-100PE diffusion-tightPE-S2PP-CPP-GFPP-HPP-RPP-SPP-MDPP-MXPVC-APVC-CPVC-CPEPVC recycledPVC-OPVC-URst 37.2 (1.0038)Rst 37.3 N (1.0116)Rst 37.3 U (1.0114)Stainless steel 304 (1.4301)Stainless steel 304 L (1.4306)Stainless steel 316 (1.4401)Stainless steel 316 L (1.4404)Stainless steel 316 Ti (1.4571)Stainless steel 321 (1.4541)Forged steelSt 33 (1.0035)St 34.2 (1.0034)St 35 (1.0308)St 35.8 (1.0305)St 37 (1.0254)St 37.2 (1.0037)St 37.8 (1.0345)St 44.0 (1.0256)St 44.2 (1.0044)St 44.3 annealed (1.0144)St 44.3 unannealed (1.0431)St 50.2 (1.0050)St 52.0 (1.0421)St 52.3 annealed (1.0570)St 52.3 unannealed (1.0553)St 60.2 (1.0060)St 70.2 (1.0070)TT St 35 N (1.0356)Ust 37.2 (1.0036)Other
3
Surface protection connection 1
A—
4
Surface treatment connection 1
A—
13
Material sealing
A—

Options (2)

#FeatureTypeUnitAllowed values
5
System specific
L——
26
Capped
L——

Connection (8)

#FeatureTypeUnitAllowed values
6
Nominal diameter connection 1
A—
7
Outer pipe diameter connection 1
Nmm—
8
Wall thickness, connection 1
Nmm—
9
Wall thickness connecting pipe, connection 1
Nmm—
10
Connection 1
A—
15
Length of connection 1
Nmm—
16
Working length connection 1
Nmm—
27
With connection indicator
L——

Operating conditions (3)

#FeatureTypeUnitAllowed values
11
Max. operating pressure at 20 °C
Nbar—
19
Medium temperature (continuous)
R°C—
20
Max. operating pressure at max. medium temperature
Nbar—

Other (2)

Colour (1)

Measurements (3)

#FeatureTypeUnitAllowed values
17
Wrench width
Nmm—
18
Wrench width union nut
Nmm—
22
Standard Dimension Ratio (SDR)
N——

Model/type (3)

#FeatureTypeUnitAllowed values
23
With sealing rings/gaskets
L——
24
With drain valve
L——
25
With de-aerator
L——

Approval/certification (14)

#FeatureTypeUnitAllowed values
28
FM quality mark
L——
29
UL quality mark
L——
30
ULC quality mark
L——
31
LPCB quality mark
L——
32
DIN-CERTCO certificate
L——
33
VdS quality mark
L——
34
With approval for TÜV
L——
35
DVGW quality mark for gas
L——
36
DVGW quality mark for water
L——
37
Compliant with NF 545
L——
38
KIWA certified
L——
39
Gastec QA mark
L——
40
KOMO certified
L——
42
Type approval according to BBR/EKS
L——

Energy efficiency/environmental (1)

#FeatureTypeUnitAllowed values
41
Gastec QA - AR 214 (H2)
L——