EC003024 version 4

Fitting with 2 connections

Published in
ETIM-10.0
Also called
3-way coupling, Adapter, Adapter curve, Adapter for radiator plug, Adapter knee, Adapter ring, Adhesive fitting, Adhesive fitting with 2 connections, Angle coupling, Angle fitting, A-sock, Band clamp fitting with 2 connections, Bayonet transition piece, Bend, Block flange, Capillairfitting, Cast iron sleeve, Clamp fitting, Clamp fitting with 2 connections, Clamping-strip fitting with 2 connections, Click fitting, Compression fitting, Compression ring fitting with 2 connections, Compression ring valve coupling, Concentric course, Concentric reducer, Coupling, Coupling with air vent, Coupling with drain, Curve, Double adapter ring, Double bend, Double pipe nipple, Double spum, Eccentric, Eccentric reducer, Elbow, Elbow fitting, Electrical socket, Electrofusion fitting connection, Electrofusion socket, E-piece, Extended curve, Extension pipe, Fitting with double dimensions, Fitting with plain ends, Flange adapter, Flange reducer, Flanged fitting with 2 connections, Flanged pipe, Floor closet bend, Floor closet connection with sleeve, Gas fitting, Gauge sock, Glass fitting, Glass tube, Glue bend, Glue fitting, Glue fitting with 2 connections, Glue knee, Glue socket, Glue socket with 2 connections, Glued fitting with double dimensions, Groove coupling, Grooved fitting with 2 connections, Half coupling, Hexagonal nipple, Knee, Laminated fitting with 2 connections, Left-right threaded fitting, Lockable half coupling, Long curve, Multi-joint coupling, Nipple, Nipple hexagonal, Offset, PB-weld fitting, PE-weld fitting, PE-weld knee, Pipe nipple, Pipe reducing sleeve, Plastic weld adapter, Plastic weld fitting, Plastic weld fitting with 2 connections, Plastic weld reduction, Plug socket, Pointed piece for coupling, Power curve, PP-weld fitting, Press coupling, Press fitting, Press fitting with 2 connections, Press knee, Push fitting, Push fitting with 2 connections, PVDF-weld fitting, Rainwater pipe bend, Reducer, Reducing coupling, Reducing groove coupling, Reducing ring, Reducing socket, Repair fitting, Sleeve, Slide sock, Slide-ring, Slide-sock, Sliding fitting with 2 connections, Slip sleeve, Slip sock, Slippery nipple, Sock, Sock nipple, Solder, Solder fitting, Soldered fitting, Soldered fitting with 2 connections, Soldered ring, Soldered sock, Soldering fitting, Solvent cement coupling, Solvent cement fitting with 2 connections, Solvent cement joint, Split, Straight bulkhead coupling, Straight coupling, Straight fitting, System fitting with 2 connections, Thread reduction, Threaded, Threaded connection, Threaded fitting, Threaded fitting with 2 connections, Threaded nipple, Three-piece coupling, Transition adapter rings, Transition coupling, Transition curve, Transition fitting with 2 connections, Transition knee, Transition nipple, Transition piece, Transition plug, Transition sock, Transition system fitting with 2 connections, Transitional sleeve, U2 bend, U2 coupling, U2 reducer, Ultra range coupling, Wall closet bend, Wall closet connecting piece, Welded-on bend, Welded-on fitting, Welded-on fitting with 2 connections, Welded-on plastic fitting with 2 connections, Welding nipple, Welding sock

Material (9)

#FeatureTypeUnitAllowed values
1
Material connection 1
A—
2
Material quality connection 1
A—
Al 99.0 (3.0205)Al 99.5 (3.0255)Al 99.9 (3.0305)Aluminium bronzeBronze (Rg 5)Bronze (Rg 7)Bronze (Rg 12)Silicon bronzeZinc-poor bronze (Rg 10)Zinc-free bronze (90/10)Cu-DHP (CW024A)CuNi10Fe1Mn
91 moreCuNi10Fe1.6MnCuSi4Zn4MnPCuSi4Zn4MnP-CCuSi4Zn9MnPCuSi4Zn9MnP-CCuSn4Zn2PSCuSn5Zn5Pb2CuSn5Zn5Pb5-CCuZn21Si3P (CW724R)CuZn21Si3P (CC768S)CuZn36Pb-C (CC770S)CuZn33Pb1.5AlAs (CW626N)CuZn36Pb2As (CW602N)CuZn36Pb3 (CW603N)CuZn38AsCuZn39Pb2 (CW612N)CuZn39Pb3 (CW614N)CuZn39Pb3 (CW617N)CuZn40Pb2 (CW617N)EN AW-5083 (AlMg4.5Mn)EN AW-5754 (AlMg3)EN AW-6060 T5(AlMgSi)EN AW-6082 T6(AlSi1MgMn)EN-GJMW-400-5 (EN-JM1030)Ethylene-propylene diene monomer rubber (EPDM)Alloyed steelCast iron EN-GJL-200 (GG 20)Cast iron EN-GJL-250 (GG 25)Cast iron EN-GJS-400-15 (GGG 40)Cast iron EN-GJS-400-18 (GGG 40.3)Cast iron EN-GJS-500-7 (GGG 50)Malleable cast ironASTM A536 Grade 65-45-12ASTM A743 CF8Cast steelStonewareFibre-reinforced plasticDezincification resistant brass (DZR)NBR (nitrile rubber)PA 6PE-40PE-50PE-80PE-100PE diffusion-tightPE-S2PP-CPP-GFPP-HPP-MDPP-MXPP-RPP-SPVC-APVC-CPVC-CPEPVC recycledPVC-OPVC-URst 37.2 (1.0038)Rst 37.3 N (1.0116)Rst 37.3 U (1.0114)Stainless steel 304 (1.4301)Stainless steel 304 L (1.4306)Stainless steel 304 L (1.4307)Stainless steel 316 (1.4401)Stainless steel 316 L (1.4404)Stainless steel 316 L (1.4432)Stainless steel 316 Ti (1.4571)Stainless steel 321 (1.4541)Forged steelSt 33 (1.0035)St 34.2 (1.0034)St 35 (1.0308)St 35.8 (1.0305)St 37 (1.0254)St 37.2 (1.0037)St 37.8 (1.0345)St 44.0 (1.0256)St 44.2 (1.0044)St 44.3 annealed (1.0144)St 44.3 unannealed (1.0431)St 50.2 (1.0050)St 52.0 (1.0421)St 52.3 annealed (1.0570)St 52.3 unannealed (1.0553)St 60.2 (1.0060)St 70.2 (1.0070)TT St 35 N (1.0356)Ust 37.2 (1.0036)Other
3
Surface protection connection 1
A—
4
Surface treatment connection 1
A—
5
Material connection 2
A—
6
Material quality connection 2
A—
Al 99.0 (3.0205)Al 99.5 (3.0255)Al 99.9 (3.0305)Aluminium bronzeBronze (Rg 5)Bronze (Rg 7)Bronze (Rg 12)Silicon bronzeZinc-poor bronze (Rg 10)Zinc-free bronze (90/10)Cu-DHP (CW024A)CuNi10Fe1Mn
91 moreCuNi10Fe1.6MnCuSi4Zn4MnPCuSi4Zn4MnP-CCuSi4Zn9MnPCuSi4Zn9MnP-CCuSn4Zn2PSCuSn5Zn5Pb2CuSn5Zn5Pb5-CCuZn21Si3P (CW724R)CuZn21Si3P (CC768S)CuZn36Pb-C (CC770S)CuZn33Pb1.5AlAs (CW626N)CuZn36Pb2As (CW602N)CuZn36Pb3 (CW603N)CuZn38AsCuZn39Pb2 (CW612N)CuZn39Pb3 (CW614N)CuZn39Pb3 (CW617N)CuZn40Pb2 (CW617N)EN AW-5083 (AlMg4.5Mn)EN AW-5754 (AlMg3)EN AW-6060 T5(AlMgSi)EN AW-6082 T6(AlSi1MgMn)EN-GJMW-400-5 (EN-JM1030)Ethylene-propylene diene monomer rubber (EPDM)Alloyed steelCast iron EN-GJL-200 (GG 20)Cast iron EN-GJL-250 (GG 25)Cast iron EN-GJS-400-15 (GGG 40)Cast iron EN-GJS-400-18 (GGG 40.3)Cast iron EN-GJS-500-7 (GGG 50)Malleable cast ironASTM A536 Grade 65-45-12ASTM A743 CF8Cast steelStonewareFibre-reinforced plasticDezincification resistant brass (DZR)NBR (nitrile rubber)PA 6PE-40PE-50PE-80PE-100PE diffusion-tightPE-S2PP-CPP-GFPP-HPP-MDPP-MXPP-RPP-SPVC-APVC-CPVC-CPEPVC recycledPVC-OPVC-URst 37.2 (1.0038)Rst 37.3 N (1.0116)Rst 37.3 U (1.0114)Stainless steel 304 (1.4301)Stainless steel 304 L (1.4306)Stainless steel 304 L (1.4307)Stainless steel 316 (1.4401)Stainless steel 316 L (1.4404)Stainless steel 316 L (1.4432)Stainless steel 316 Ti (1.4571)Stainless steel 321 (1.4541)Forged steelSt 33 (1.0035)St 34.2 (1.0034)St 35 (1.0308)St 35.8 (1.0305)St 37 (1.0254)St 37.2 (1.0037)St 37.8 (1.0345)St 44.0 (1.0256)St 44.2 (1.0044)St 44.3 annealed (1.0144)St 44.3 unannealed (1.0431)St 50.2 (1.0050)St 52.0 (1.0421)St 52.3 annealed (1.0570)St 52.3 unannealed (1.0553)St 60.2 (1.0060)St 70.2 (1.0070)TT St 35 N (1.0356)Ust 37.2 (1.0036)Other
7
Surface protection connection 2
A—
8
Surface treatment connection 2
A—
33
Material sealing
A—

Model/type (7)

#FeatureTypeUnitAllowed values
9
Shape
A—
10
Model
A—
34
With buffer stud
L——
48
With thermal insulation
L——
51
With sealing rings/gaskets
L——
54
With drain valve
L——
55
With de-aerator
L——

Other (7)

#FeatureTypeUnitAllowed values
11
Bend angle
N°—
29
Flange compression class (ANSI)
A—
30
Flange compression class (PN)
A—
31
Flange compression class (JIS)
A—
32
Flange compression class (BS)
A—
35
Zeta value
N——
49
Ring stiffness class
A—

Measurements (5)

#FeatureTypeUnitAllowed values
12
Bend radius
Nmm—
37
Length
Nmm—
42
Wrench width
Nmm—
43
Wrench width union nut
Nmm—
50
Standard Dimension Ratio (SDR)
N——

Options (5)

#FeatureTypeUnitAllowed values
13
Reducing
L——
14
Eccentric
L——
15
System specific
L——
36
High tensile strength
L——
52
Capped
L——

Connection (17)

#FeatureTypeUnitAllowed values
16
Nominal diameter connection 1
A—
17
Outer pipe diameter connection 1
Nmm—
18
Wall thickness, connection 1
Nmm—
19
Wall thickness connecting pipe, connection 1
Nmm—
20
Connection 1
A—
21
Contour code connection 1
A—
22
Nominal diameter connection 2
A—
23
Outer pipe diameter connection 2
Nmm—
24
Wall thickness, connection 2
Nmm—
25
Wall thickness connecting pipe, connection 2
Nmm—
26
Connection 2
A—
27
Contour code connection 2
A—
38
Length of connection 1
Nmm—
39
Working length connection 1
Nmm—
40
Length of connection 2
Nmm—
41
Working length connection 2
Nmm—
53
With connection indicator
L——

Colour (1)

Mounting/installation (1)

#FeatureTypeUnitAllowed values
44
Tightening moment
RNm—

Operating conditions (3)

#FeatureTypeUnitAllowed values
45
Medium temperature (continuous)
R°C—
46
Max. operating pressure at 20 °C
Nbar—
47
Max. operating pressure at max. medium temperature
Nbar—

Approval/certification (14)

#FeatureTypeUnitAllowed values
56
FM quality mark
L——
57
LPCB quality mark
L——
58
ULC quality mark
L——
59
UL quality mark
L——
60
DIN-CERTCO certificate
L——
61
VdS quality mark
L——
62
With approval for TÜV
L——
63
DVGW quality mark for gas
L——
64
DVGW quality mark for water
L——
65
Certified according to NF 545
L——
66
KIWA certified
L——
67
Gastec QA mark
L——
68
KOMO certified
L——
70
Type approval according to BBR/EKS
L——

Energy efficiency/environmental (1)

#FeatureTypeUnitAllowed values
69
Gastec QA - AR 214 (H2)
L——