EC010008 version 7
Float-controlled trap
- Published in
- ETIM-10.0, ETIM-8.0, ETIM-9.0
- Also called
- Float trap, Trap
Material (2)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 1 | Material | A | — | |
| 11 | Surface protection | A | — |
Measurements (4)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 2 | Nominal diameter | A | — | |
| 21 | Height | N | mm | — |
| 22 | Length | N | mm | — |
| 23 | Angle | N | ° | — |
Connection (6)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 3 | Outer pipe diameter all connections | N | mm | — |
| 4 | Connections | A | — | Internal thread cylindrical BSPP-G (ISO 228-1)Internal thread metricInternal thread conical (NPT)Internal thread conical BSPT-Rc (ISO 7-1 / EN 10226-1)External thread conical BSPT-R (ISO 7-1 / EN 10226-1)External thread cylindrical BSPP-G (ISO 228-1)External thread metricExternal thread conical (NPT)FlangeSoldered endSoldered sleeveCompression ring |
| 17 | Length of connection 1 | N | mm | — |
| 18 | Working length connection 1 | N | mm | — |
| 19 | Length of connection 2 | N | mm | — |
| 20 | Working length connection 2 | N | mm | — |
Other (2)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 5 | Article compression class | A | — | |
| 6 | Flange compression class | A | — |
Operating conditions (2)
Mounting/installation (2)
Application (1)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 12 | Suitable for compressed air | L | — | — |