EC011608 version 5
Open central heating/cooling distributor
- Published in
- ETIM-10.0
- Also called
- Hydraulic balancer, Low loss header, Open central cooling distributor, Open central heating distributor, Open CH distributor
Connection (10)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 1 | Number of boiler connections | N | — | — |
| 10 | Primary connection | A | — | |
| 11 | Nominal diameter primary connection | A | — | |
| 12 | Outer pipe diameter primary connection | N | mm | — |
| 13 | Secondary connection | A | — | |
| 14 | Nominal diameter secondary connection | A | — | |
| 15 | Outer pipe diameter secondary connection | N | mm | — |
| 17 | Number of air-release connections | N | — | — |
| 19 | With drain connection | L | — | — |
| 20 | Nominal diameter drain connection | A | — |
Model/type (6)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 2 | With thermal insulation | L | — | — |
| 23 | Thermometer | A | — | |
| 24 | Pressure gauge | A | — | |
| 25 | Shut of valve | A | — | |
| 26 | Dirt separator | A | — | |
| 27 | Magnetite separator | A | — |
Application (4)
Material (2)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 7 | Material | A | — | |
| 8 | Surface protection | A | — |
Measurements (2)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 16 | Nominal diameter shunt pipe | A | — | |
| 18 | Nominal diameter air-release | A | — |
Operating conditions (2)
Options (1)
| # | Feature | Type | Unit | Allowed values |
|---|---|---|---|---|
| 28 | Dosing point for solid or liquid cleaning additives | L | — | — |